Siris AutomationWhatsApp us

Live machine data for CNC and VMC shops

Every machine on your shop floor. Live, on your phone.

Siris connects to the CNC controls you already have and shows, every second, what each machine is doing: running or stopped, parts made, cycle time, and every offset or part-count change made by hand. No sensors, no operator entry, no change to your machines.

Siris machine board showing every machine's state, running percentage and parts this shift

The problem

Questions every shop asks, every day

Is the machine running?

Today: Someone walks to the machine to find out.

How many parts this shift?

Today: The register at the end of the shift.

Why did it stop, and for how long?

Today: A guess.

Who changed the offset, and was the next part checked?

Today: Nobody knows.

Was the part count typed in?

Today: The number on the control is trusted as it is.

The answers come late, by hand, and often wrong. Siris reads them from the machine itself.

Straight from the control

What we read from every machine, every second

  • Running, idle, alarm or disconnected, and for how long
  • Part count, and the protected total-parts counter
  • Main program, component and operation
  • Cycle time, split into loading, cutting per tool and tool change
  • Spindle speed, spindle load and feed
  • Tool in the spindle and its offset numbers
  • Alarms with their messages
  • Every tool and work offset value

Features

One plan, every feature

Live machine board

Every machine on one screen, problems first: state, running % this shift, parts made, what it is making. The same board as a compact list on the phone.

TV screen for the shop floor

One tile per machine, readable from across the floor. Green running, grey idle, red disconnected; amber when a part needs checking.

Every cycle measured

Loading, cutting and tool-change time for each cycle against the typical one; parts per hour, long stops and where the time went.

OEE per machine and shift

Availability, performance and quality against your standard cycle times, imported from Excel. Download any figure as Excel or CSV.

Offset log with part checks

Every change to tool wear, geometry and work offsets within seconds: old, new, by hand or by program. A risky change in production asks for the next part to be measured.

Part counts you can trust

A count typed on the control that the machine cycles do not explain is held back until an admin accepts it. Every decision is in the audit log.

Production by component

Parts per component and operation across machines, setup time, and a floor timeline for each shift.

Tools and store

Insert changes and life per edge, with a tool catalogue and store for the shop.

Shop-floor TV screen with one tile per machine
The TV screen on the shop floor.
Machine board on a phone
The same board on the phone.
Machine page with the live machine, this cycle split by tool, and the shift summary
Every cycle measured: live machine, this cycle, shift summary.
Offset log with old and new values and a part check
Every offset change, caught and checked.
Part-count changes held back for an admin decision
Part counts typed on the control are held back until an admin decides.

How it connects

One cable per machine. Nothing else changes.

Machines to gateway to cloud to phone, TV and computer
  • A network cable to the control’s Ethernet port; a small fanless gateway reads every machine once a second (FANUC FOCAS).
  • Read only: it never writes to the machine and never stops it.
  • No sensors and no wiring into the machine. The factory only connects out to our cloud.
  • Hosted on Microsoft Azure in India. If the internet drops, the gateway keeps up to 3 days of data and sends it when it is back.

Live at Siris Engineering, Bhiwadi

Caught in the first 15 hours

Running since 29 Oct 2026 on VMCs and CNC lathes with FANUC 0i controls. The offset log went live on 12 Nov 2026 at 20:40; this is what it found by the next morning.

178

offset changes on 7 machines

105

of them made by hand

38

changes of 1 mm or more

10

parts typed onto one counter while it stood still

None of this was visible before.

Pricing and contact

Priced per machine per month

A one-time setup for the site, then a monthly price for each machine you connect, support included. Start with a few machines and add more any time. Ask us for a quote.